| Home | Free Articles for Your Site | Submit an Article | Advertise | Link to Us | Search | Contact Us |
This site is an archive of old articles

    SEARCH ARTICLES
    Custom Search


vertical line

Article Surfing Archive



Scalability Testing - 7 Tips For Improvement - Articles Surfing

Systems that work well during development, deployed on a small scale, can fail to meet performance goals when the deployment is scaled up to support real levels of use.

An apposite example of this comes from a major blue chip company that recently outsourced the development of an innovative high technology platform. Though development was behind schedule this was deemed acceptable. The system gradually passed through functional elements of the user acceptance testing and eventually it looked like a deployment date could be set. But then the supplier started load testing and scalability testing. There followed a prolonged and costly period of architectural changes and changes to the system requirements. The supplier battled heroically to provide an acceptable system, until finally the project was mothballed.

This is not an isolated case. IT folklore abounds with similar tales. From ambulance dispatch systems to web-sites for the electronic submission of tax returns, systems fail as they scale and experience peak demands. All of these projects appear not to have identified and ordered the major risks they faced. This is a fundamental stage of risk based testing, and applies equally to scalability testing or load testing as it does to functionality testing or business continuity testing. With no risk assessment they did not recognise that scaling was amongst the biggest risks, far more so that delivering all the functionality

Recent trends towards Service Oriented Architecture (SOA) attempt to address the issue of scalability but also introduce new issues. Incorporating externally provided services into your overall solution means that your ability to scale now depends upon these external system operate under load. Assuring this is a demanding task and sadly the load testing and stress testing here is often overlooked.

Better practice is to start the development of a large scale software system with its performance clearly in mind, particularly scalability testing, volume testing and load testing. To create this performance testing focus:

1. Research and quantify the data volumes and transaction volumes the target market implies. Some of these figures can be eye openers and help the business users realise the full scale of the system. This alone can lead to reassessment of the priority of many features.

2, Determine the way features could be presented to users and the system structured in order to make scaling of the system easier. Do not try and have the same functionality you would have for a single user desktop solution provide an appropriate scalable alternative.

3. Recognise that an intrinsic part of the development process is load testing at representative scale on each incremental software release. This is continual testing, focusing on the biggest risk to the project: the ability to operate at full scale.

4. Ensure load testing is adequate both in scope and rigour. Load testing is not just about measuring response times with a performance test. The load testing programme needs to include other types of load testing including stress testing, reliability testing, and endurance testing.

5. Don*t forget that failures will occur. Large scale systems generally include server clusters with fail-over behaviour. Failure testing, fail-over testing and recovery testing carried out on representative scale systems operating under load should be included.

6. Don*t forget catastrophic failure could occur. For large scale problems, disaster testing and disaster recovery testing should be carried out at representative scale and loads. These activities can be considered the technical layers of business continuity testing.

7. Recognise external services if you use them. Where you are adopting an SOA approach and are dependent on external services you need to be certain that the throughput and turnaround time on these services will remain acceptable as your system scales and its demands increase. A smart system architecture will include a graceful response and fall-back operation should the external service behaviour deteriorate or fail.

© Acutest 2005 * http://www.acutest.co.uk

Submitted by:

Mark Trellis

Mark Trellis is an experienced consultant working in performance testing, scalability testing and load testing. For further information visit: http://www.acutest.co.uk or http://www.acutest.co.uk/performance-testing.html

software-testing@hotmail.co.uk



        RELATED SITES






https://articlesurfing.org/computers_and_internet/scalability_testing_7_tips_for_improvement.html

Copyright © 1995 - Photius Coutsoukis (All Rights Reserved).










ARTICLE CATEGORIES

Aging
Arts and Crafts
Auto and Trucks
Automotive
Business
Business and Finance
Cancer Survival
Career
Classifieds
Computers and Internet
Computers and Technology
Cooking
Culture
Education
Education #2
Entertainment
Etiquette
Family
Finances
Food and Drink
Food and Drink B
Gadgets and Gizmos
Gardening
Health
Hobbies
Home Improvement
Home Management
Humor
Internet
Jobs
Kids and Teens
Learning Languages
Leadership
Legal
Legal B
Marketing
Marketing B
Medical Business
Medicines and Remedies
Music and Movies
Online Business
Opinions
Parenting
Parenting B
Pets
Pets and Animals
Poetry
Politics
Politics and Government
Real Estate
Recreation
Recreation and Sports
Science
Self Help
Self Improvement
Short Stories
Site Promotion
Society
Sports
Travel and Leisure
Travel Part B
Web Development
Wellness, Fitness and Diet
World Affairs
Writing
Writing B